Vacuum Wall Hooks – Heavy Loads on Tile With No Holes Left Behind

Two lever-locked hooks that press flat against a smooth surface and take 6 kg, roughly 13 pounds, each. Push the cup down, flip the lever and it grips; flip it back and the hook lifts away clean. The bodies are ABS and the cups are German-made rubber.

Why choose these hooks?

A hole in tile is permanent, and adhesive hooks tend to let go precisely when something heavy is on them. A lever cup evacuates the air and pulls itself tight. Move it whenever the layout changes.

• 13 lb each: enough for a loaded grocery bag, a wet robe or a cast iron pan.
• Lever action: press the cup flat, flip the arm and the seal closes.
• Nothing left behind: no screws, no holes and no glue residue on the surface.
• Use it again: lift, reposition and lock as often as you like.
• Pair supplied: one either side of the basin, or one per room.

Up in a second, down in another.

They seal on genuinely smooth, non-porous surfaces: glass, mirror, polished tile, stainless steel and plastic panels. Matte porcelain, wood and unpolished stone will not hold a vacuum, so pick the spot accordingly. Clean the cup and the wall before pressing, because a single grain of grit breaks the seal.

Specifications

• ABS body with rubber suction cup
• 6 kg (13 lb) capacity per hook
• lever-lock mounting
• supplied as a pair

Lock one onto the tile and load it up.