Anti-Slip Stair Tape – Grip on the Tread With the Grain Still Showing

Clear adhesive strips that add texture across the front of a stair tread. Each strip runs 3.9 by 24 inches, which spans most interior staircases in a single piece. The PEVA film is transparent, so the wood or tile underneath stays on show.

Why choose this stair tape?

Polished timber and tile turn slick under socks, especially on the way down. Texture across the nose of the tread gives the foot something to catch. Because the film disappears visually, the staircase still looks the way you chose it.

• Grip where it counts: Texture sits on the front of the tread, where the foot actually lands.
• Clear film: Grain, tile pattern and stone color all stay visible through it.
• Full-width strips: 3.9 x 24 in covers one standard step per piece.
• Easy underfoot: Textured rather than abrasive, so bare feet are still comfortable.
• Peel and press: No tools, no curing time, nothing screwed into the timber.

Same staircase, better footing, and nobody spots the difference.

Clean each tread with a degreaser and let it dry fully, because dust is what makes a strip lift weeks later. Set the strip about 2 cm back from the front edge and press outward from the middle to push the air out. Narrower treads take a quick trim with scissors.

Specifications

• Polyethylene vinyl acetate (PEVA)
• 10 x 61 cm (3.9 x 24 in) per strip
• Transparent finish
• Self-adhesive backing
• For indoor staircases

Press them on and take the stairs in socks again.