Step lights that outline the edge of every tread once the sun goes down

Each unit carries its own solar panel, battery and warm white LEDs, so nothing has to be run back to a socket. A sensor in the housing brings them on as the light drops and switches them off at daybreak. Fix them with the supplied tape or screws.

Why choose these step lights?

Outdoor steps are the part of a garden that most needs marking after dark, and usually the hardest place to get a cable to. These units skip the cable entirely. A day in the sun covers a full night of light.

Tape or screws: Both are in the box; tape suits smooth risers, screws suit timber and rough stone.
Charges in daylight: Four to five hours of sun gives 8 to 10 hours of output after dark.
Switches on by itself: The dusk sensor handles the timing, so there is no switch and no timer to set.
Rain and dust sealed: An IP65 housing stands up to rain, snow and dust year round.
Warm white output: The LEDs stay on the warm side, which reads better on brick and timber than cold blue light.

Packs of 4, 10 or 20 cover anything from a short flight to a long garden path.

They suit stair risers, deck edges, patio walls, porch steps and the border of a path. Fit them low on the riser so the beam lands on the tread rather than in your eyes. With no wiring, you can move a unit to a different step later without leaving anything behind.