Head Magnifier Visor – Close Work Without Holding a Lens

Three lenses at 8x, 15x and 23x click into one frame, and two lamps on pivot arms light whatever sits under them. Wear it on the nose like glasses, or switch to the elastic band when the session runs long. The whole thing weighs about 115 grams.

Why choose this head magnifier visor?

Magnification is only half the problem. The other half is your own head blocking the light while one hand is busy holding a lens. A visor settles both at once and stays clear of the tweezers.

• Lens set: 8x, 15x and 23x, each seated in the frame in a couple of seconds.
• Pivot lamps: Two LEDs on arms you aim at the exact spot you are looking at.
• Frame or band: Glasses-style arms for short jobs, a soft elastic band for long ones.
• 115 g on an ABS shell: Light enough that it stays put rather than creeping down.
• Acrylic optics: Bright, clear and tolerant of the occasional tap against the bench.

Small parts stop being a matter of squinting and guessing.

Start with the weakest lens that shows the detail, because the strong ones sit very close to the work. The light switch turns roughly thirty degrees clockwise for on and back the same way for off. Park the spare lenses in the box so nothing scuffs the surfaces.

Specifications

• ABS frame with acrylic lenses
• Lens strengths: 8x, 15x, 23x
• Two pivoting LED lamps, batteries included
• Weight approx. 115 g

Clip it on and take a proper look.