Coat Hangers – shoulders that stay where the tailor put them

Two hangers in solid camphor wood, cut with a wide curve that follows the shoulder line of a jacket. The width spreads the load across the seam instead of pushing it into two points. The finish is smooth and the grain stays visible.

Why choose these coat hangers?

Wire and thin plastic concentrate the whole weight of a coat on two narrow spots, and after a season you can see exactly where. A broad wooden shoulder carries the garment the way it was cut to hang. Solid wood also takes a heavy winter coat without flexing in the middle.

Broad shoulder curve: supports blazers and coats across the full seam.
Solid camphor: dense hardwood that does not bow under a loaded overcoat.
Sanded finish: nothing rough to catch a lining or a loose knit.
Room to breathe: the depth holds garments apart so they air out between wearings.
Pair per set: two hangers, enough for a suit or the jackets worth the upgrade.

You notice it on the shoulder of every jacket you own.

Save them for the structured pieces: blazers, overcoats, heavy knits, anything where the shoulder line does the work. Wipe them down dry rather than washing them, since wood and water are a poor mix. Leave roughly a hand's width between hung garments so air can move.